How to Carry out Daily Maintenance on Spunbond Non-woven Fabric Machines?

How to Carry out Daily Maintenance on Spunbond Non-woven Fabric Machines?

Summary

Only the daily cleaning and maintenance of the spunbond non-woven machine can keep its operation in good condition. Let's learn about the daily maintenance methods written by the spunbond non-woven machine.

the daily maintenance method of spunbond non-woven machines

After a large amount of operation of spunbond non-woven fabric machine, there may be residual raw materials and even wear and tear of parts. If the correct maintenance is not carried out, the spunbonded non-woven fabric machine will be in poor condition in operation, and in serious cases, it will cause equipment failure. The following is the daily maintenance method of spunbond non-woven machines.

Air compressor protection

The air compressor must discharge water regularly, not less than 4 times a day. (Only when the compressed gas is oil-free and water-free can the service life of the cylinder, solenoid valve, and inflatable shaft be guaranteed)

Cleaning and replacement of components

(1) Replacement and cleaning of air-conditioning indoor filter bags

The new filter bag is replaced every 6 months, the old filter bag is replaced every 3 to 4 months, and the fan filter bag of the DC motor is replaced every 1 to 2 months.

(2) Cleaning the hood of the suction fan

Regular cleaning, based on the dustiness and suction of the raw materials, usually once every 6 months.

(3) Cleaning and maintenance of the single extraction fan

It is generally cleaned and maintained once every 12 months, and the cleaning time is determined according to the properties of the raw materials and related process settings.

(4) Replacement of the filter disc of the filter

According to the properties of the raw materials, the added auxiliary materials, the cleanliness of the returned materials, and related process settings.

(5) Replacement of spinneret filter

Depending on the properties of the raw materials, the added auxiliary materials, the cleanliness of the returned materials, and related process settings, it will have a certain impact on the quality of the product.

Water system cleaning

Keep the cooling tower clean and the cooling water clean, and replace it when necessary. The refrigerating machine pipeline should be cleaned regularly. When the high pressure of the refrigerating machine is close to the alarm value, it must be cleaned immediately. Once alarmed, it will stop immediately and cannot be turned on.

Replacement and addition of oil

For the replacement process of the reducer oil, refer to the instruction manual of the reducer. The lubricating oil of the bearing should be added and maintained regularly. The heat transfer oil should be replaced according to the oil quality, otherwise, it may cause blockage of the tank pipeline. The hydraulic oil should also be replaced according to the oil quality, otherwise, it will affect the use and pressure status of the oil pump.

If you want to learn more about spunbond nonwoven machines after reading the above, you can contact ASEN for professional advice.

As a professional manufacturer of non-woven machines, we have won praise and trust from many customers with our high-quality products and considerate service. We continue to research good technologies and effective solutions, and we also control the quality of products in an all-round way, so as to provide customers with safe and high-quality products. At the same time, we can also provide thoughtful one-stop service according to customer needs. If you want to buy our high-quality spunbond non-woven machine, please contact us immediately!